Netgear Wg111 Wpa Disabled

They did ...

As agreed, the pump for conveying concrete to a height of 2.50m came in early afternoon with a first load of 5m3 to cover only a portion of the surface.

A technique for implementing well-established, with the conductor at the inlet pipe and two musicians rake.

A second router 7m3 concrete may be necessary there will not be a drop.

Meanwhile below, are the great waters, a real pool. Despite the load, the deformed slabs holding up

After pulling and smoothing of the slab, the final result:

So does ... thank you. Tonight it's the holidays ... Ducasse so good guys!

Homemade Luggade Tags

late preparations

Today

preparation of formwork and reinforcement of the beam located above the garage because of its advanced compared to the facade. It will also support for the frame.

A great piece anyway!

And tomorrow is the big day: the pump is leased and expected to 13:00. They will have to earn the leave year-end.

How To Make A Dog Draught Excluder

formwork and welded mesh

Before pouring the slab on the slab, the entire surface is covered with a wire mesh for reinforcing concrete and provide reinforcement in this together.

To leave open the air gap between two walls formwork is in place throughout the perimeter of the slab. The goal is obviously to prevent the concrete from flowing into this space.

The open spaces above the walls are also scrapped. We can see small wooden plates stapled and placed vertically. They serve as buffers to slab, the concrete should not run too the ground there.

Nice work preparing for the hopper of the stairs. Doubling the beam on the left which I already spoken, and especially implementation of the reinforcement of a trimmer. It is a beam that is intended to retain the perpendicular beams that do not rely on the supporting wall to to leave a hole (hopper) in the slab.

An imposing reinforcement is placed above the bay window, it serves preparatory to a future based beam where the 40cm frame.

How To Masterbate With A Fruit

Laying slabs

Since Monday our team is back to full strength, morale power to impeach his last work week of 2008 with the aim that the slab is poured by Friday. Fingers crossed!

After completing the final location of beams and proceeded to strut their central day Tuesday was dedicated to the famous pose with a polystyrene slab soffit wood. This process is not new but the company B. Lannoy not used since very long. The number of clients who accepted his pose apparently can be counted on the fingers of one hand ... but remain confident. This concept seemed interesting by thermal comfort he seems to bring. For more information I invite you to check out the manufacturer's website that our team leader has had ample opportunity to see last week during his convalescence forced: http://www.seac-gf. fr/p369_167/seacbois

Here are some pictures, first a view from below:

Then from above, we notice the double girder bottom left on the site Hopper's staircase:

is back below, it's strange the impression of cover. Our comrades have not skimped on the scaffolding at the bay window as a beam "fairly important" will also be placed on the slab to support the structure at this location.

can also see the location of the chimney with the laying of the first ball

It concludes with the overview and its brand new white cover ... no no it has not snowed:

Programming Viper Alarm

haaaa .... Plans: finally voila!

Good! Moment of truth where critics of all stripes will fuser ... then let strong anyway it is too late and you can not change anything, so here are the long-awaited plans and claimed:

the DRC :

Upstairs

facades and gables:

the prospects :

After School Church Programs Donation Request

mission accomplished ... thank you

Here, as brave, having also completed the windowsills, the binomial masons still managed to put the "remainder" of the beams. Bravo guys! I therefore strongly

thus the slab can be poured by the end of next week. After this will leave the year-end at B ernard Lannoy and it would be nice that it can dry .

Again, a bituminous felt is held on blocks POROTHERM

On the next photo, we can understand the interest of the reinforcement provided by the mini- thin slab located above the reservation shutters, beams because inevitably fall on it!

Nitrous Oxide Whippet

windowsills

is continued on the finishes, the rebates are almost all complete. Here we see those in the front door. Note the difference between cement gray and white cement that we chose for the exterior masonry.

And as we must continue to address pending further beams, our two friends attacked the windowsills. A first picture of the inside to see that a new bituminous felt is placed between the brick and POROTHERM.

And for a second appearance. It's beautiful!

Pacific Science Promo

After the diagnosis is dyspraxia

To those who still doubt, I confirm that children are naturally cruel of them, but when there is difference is even worse.

I've always been impressed by the insight of children and I noticed that all children have felt much more quickly than adults that Rosa was different.

In absolute terms it does not bother me because I always enjoyed singularity, but Rosa resents his difference and she felt very early, so the eyes of other children is very important for her.

After her "incident" on repeat CP and CE1, Rosa has been labeled and much more than it has been a long time, it is always treated like a leper. In his school they call the "outdated", do not touch it for fear of being defiled. He also said that it "reeks of excrement", which obviously is wrong, but the cruelty has no limits for children.

What is said about their sister very sorry to his brothers and as she understood that there is not much to do there, Rosa says little.

I have always been attentive to what she is wearing well and well dressed, but since the beginning we try to be "fashionable" for me who hates the standardization is difficult, but we must recognize that greater acceptance by other children pass by, even if you do happen in the other side of the problem: jealousy.

The other children have long been jealous of my availability for Rosa, they do not see that I'm going to take him to appointments paramedics that may be painful (for extra work), they only see that Rosa is fortunate to have his mom comes to pick at the end of lunch to spend time with her. I'd be lying if I said that these moments together every two even time for a drive, do not make me happy. It is a moment of complicity additional, as with his brothers when I accompany them to the sport.

Children have other reasons for jealousy because Rosa is greatly appreciated by adults who care for her. She is calm, deliberate, intelligent, sensitive and sometimes naughty. It is a great comfort to me knowing it surrounded by caring and motivated to help, but its "treatment Favor "is not immune to other children and the arrival of the AVS in the class has exacerbated resentments.

An hour before his birthday celebration Rosa terrible anguish at the thought that nobody comes. The majority of girls whom she had given an invitation card tore the cards in front of everyone and announced aloud does not want to go to the anniversary of the "outdated".

Finally came eight children (children of women with whom I get along well and enjoy Rosa, not a chance) and she was thrilled. Those who did not come were jealous to know that Rosa had a nice birthday and finally redoubled malice on Monday. Besides the AVS so pretty, who comes every afternoon to help Rosa is a bit unfair, they think.

AVS mission is to help Rosa to organize, it copies the lessons when Rosa was tired, reformulates work instructions spoken, when the teacher has written on the blackboard, using to pack his locker, etc.. Rosa can not recreate what she sees, you should use the audito-verbal channel to allow it to assimilate information. Where it would eventually be if his dyspraxia dysgraphia had been diagnosed, it appears that she is very strong in spelling, since he is made to spell words. To teach him vocabulary words, just spell them, stores them and can write without mistakes. When we did it several times to copy "that they fit him in the head," was the worst of solutions, it became confused in his head As his writing deteriorated. The copy is extremely harmful.

Regarding graphics to give you an idea of its difficulties, you should imagine that you have in mind a fairy tale castle perfect, with beautiful colors. In your head what castle is perfect, but the transmission of information to your hands to realize is wrong, then ultimately the castle is distorted. The gap between the mental representation that is a perfect child with dyspraxia and its implementation on the paper is enormous and very disappointing for the child. When the more he tries to recreate a geometric shape that can not see completely (Rosa has no vision in three D), it is already distorted in his mind, imagine you praxis with disabilities in addition the final production of the child has very little to do with the original model.

We know all the ways that some materials it will always be extremely painful. Maps of geography include too much information and too difficult for him to be accessible location. Similarly, again because of its visuo-spatial, a frieze is historic for her torture. There is software to help fill these gaps, Rosa is expected to pass to the use of computers gradually with an occupational therapist.

From January a therapist specializing scheduled to visit the school to help Rosa for an hour to use his hands better and develop methods to better orient themselves in space. When we went to review the occupational therapist was totally blown away by the accuracy of the definition that Rosa had found for his dyspraxia, "My head does not command much in my hands, but yet my head going quite well "

Rosa has made incredible strides since the advent of the AVS, I have yet encountered. It's always a little hard socially, but she gained confidence, she denigrates less. There are summer camps for children dyspraxia and I do not rule to take him there so she could meet other children with similar disorders to feel less alone, but on the other side I do not want to put in a special school because I want to make sure the company is playing its role of inclusion and respect for differences and that Rosa finally accept their differences and live happily enhancing its many qualities and strength.

I must say I am well aware that she had the chance to fall for my daughter, to great people and in particular teachers who were always eager to pull up, while n 'forgetting that she remains a child.

Last night I met a teacher who was very amused to see me and my rebel bitch who took his defense, saying it worked very well in school, she was very wise and that it had to leave the "romp" on house, like all children his age.

His brothers are jealous as all siblings, but like its big brother will return in 6 th next year, I try to push him to greater autonomy in how to revise. Not only is it not easy for him because he has always been very conscious of my gaze on him and he appreciates that we work together, but I understood that in addition he interpreted this as an abandonment for more take care of Rosa. We'll have to put the record straight and find the right balance for everyone.

It's homework time!

Nursing Husbands In Islam Breastfeeding

interlude

Today was good but not great for masonry.

Sharpening Steel Vs Diamond Steel

snowy week begins evil

Well it's not cool: program change, the installation of beams is cut short. This is my first rant, I do not feel that thing of having to mount them at arms length. Our team leader, the poor, is on the floor with the best lower back pain ... and the worst ... we do not know! I convey to him the way all my wishes for a speedy recovery because he happens to have a look at this blog. Our masons

survivors did not want to risk asking the following two and understandably. They knocked on finishing joints of lintels in brick masonry and the rebates. This is a joint cement located behind the wall against which bears a window or door.

Effective anyway!

What Is The When Camera Up Uteris

floor joists

new stage in the construction, installation of concrete floor upstairs. We must first place concrete beams evenly spaced every 60cm. They bear on the chaining of the double wall bearing walls. According to the arrangement of these walls there are four areas to "dress up" and two of them beams have nearly 6m long ... So very very heavy. Our team decided to start with them.

This is the top of the garage, you can see from the gap with the middle of the wall that are prestressed beams is a slight bend to bear by weight of the screed:

ettayées beams are seen at the center of their length and charge ahead:

The second area relates to the stay, it's impressive that length. That it took the lift to the force of arms. I do not understand why a mechanical lift was not planned:

Next photo lets see what the future look like polystyrene slabs / timber that will take place between the joists

top view is also nice: